Language
English 한국어 Pусский 日本語
Fiber Laser Cutting Machine

Model

CMH1530-R-A
Hy4015-Coil
Smart Cube 1313
FAST6025-A
Hytube6522

Full Enclosed Fiber Laser Cutter CMH1530-CH-A

Full Enclosed Fiber Laser Cutter CMH1530-CH-A
5钣金画册新外观-CMH-1530-CH-A.png

Introduction

The machine tool adopts gantry type double rack and pinion, double servo motor drive, high torque and high inertia output, which effectively improves the production efficiency of the equipment; The whole machine adopts a fully enclosed outer protection design , which can effectively protect the work safety of equipment operators; Classic applications - laser cutting of metal cabinets, laser cutting of stainless steel thick plates, etc.

Inquiry

Sample

Carbon Steel cutting
Metal cabinet cutting
Metal guide cutting
Metal wall cutting
Parameter

Parameter

  • Modle
    CMH1530-CH-A
  • Working area(mm)
    1500×3000
  • Laser power
    Standard version :2000~4000W High version :6000~12000W
  • Maximum speed
    Standard version :100m/min High version :120m/min
  • Positioning accuracy(mm/m)
    ±0.03
  • Repeated positioning accuracy(mm/m)
    ±0.02
  • Weight(S)/(H)
    6500/7500kg
  • Overall dimension(mm)
    8700×2900×2500
  • Working environment
    Temp:0~45°C Humidity:≤80% Clean
  • Modle
    CMH2040-CH-A
  • Working area(mm)
    2000×4000
  • Laser power
    Standard version :2000~4000W High version :6000~12000W
  • Maximum speed
    Standard version :100m/min High version :120m/min
  • Positioning accuracy(mm/m)
    ±0.03
  • Repeated positioning accuracy(mm/m)
    ±0.02
  • Weight(S)/(H)
    9000/10500kg
  • Overall dimension(mm)
    10900×3340×2650
  • Working environment
    Temp:0~45°C Humidity:≤80% Clean
  • Modle
    CMH2560-CH-A
  • Working area(mm)
    2500×6000
  • Laser power
    Standard version :2000~4000W High version :6000~12000W
  • Maximum speed
    Standard version :100m/min High version :120m/min
  • Positioning accuracy(mm/m)
    ±0.03
  • Repeated positioning accuracy(mm/m)
    ±0.02
  • Weight(S)/(H)
    12000/ 13500kg
  • Overall dimension(mm)
    14900×4100 ×2630
  • Working environment
    Temp:0~45°C Humidity:≤80% Clean
  • Modle
    CMH1530-CH-B
  • Working area(mm)
    1500×3000
  • Laser power
    Standard version :2000~4000W High version :6000~12000W
  • Maximum speed
    Standard version :100m/min High version :120m/min
  • Positioning accuracy(mm/m)
    ±0.03
  • Repeated positioning accuracy(mm/m)
    ±0.02
  • Weight(S)/(H)
    6700Kg(body only)
  • Overall dimension(mm)
    8400×2280 ×2260
  • Working environment
    Temp:0~45°C Humidity:≤80% Clean

Feature

  • Rack and pinion transmission system, dual-servo drive, effectively improve the equipment production efficiency;
  • Enclosed protection cover to prevent the dust and fume go outside, ensure the operator could have a friendly working environment;
  • The equipment enjoy power failure memory; retreat cutting; automatic fault alarm and emergency stop; fault info auto-display;
  • Auto-focus head, Flexible piercing technique, support auto change focal position in piercing, suitable for thick metal plate processing;
  • Machine tool: 8-meter and/or 16-meter gantry milling, 600℃ heat treatment , 24 hours cooling inside the furnace to ensure the steel welded joint stress relief, then guarantee the machine tool long term accuracy and stability.;
  • Powerful algorithm engine of high efficiency and production rate; no limit of sheet and parts quantity in nesting; support manual and automatic nesting; support free form sheet nesting.
  • Model: CMH1530-CH-B Can be load in to the 40HQ
Relevant Model
×
Language
English 한국어 Pусский 日本語

This site uses cookies to improve your online experience, allow you to share content on social media, measure traffic to this website and display customised ads based on your browsing activity.